10 Panel Drug Test in Morrison, IL

Smart Drug Testing provides a 10-panel drug test at testing centers located in Morrison IL and throughout the local area. Same day service is available, and most testing centers are within minutes of your home or office. DOT drug testing and ETG Alcohol testing is also available.

(800) 977-8664

Schedule Your Test

Urine drug testing is the most common and customizable screening method available in the drug testing world. Many times, drug tests are ordered from companies, courts, or individuals without knowing what drug panel is needing to be analyzed.

The most common drug panel options include the 5, 10, 12, 14 and 17 panel drug tests but we also offer specialized and customized panels based on your specific need and we are here to discuss exactly what is tested in each type of drug test panel.

Urine or Hair Drug Testing - You Choose!

The detection period for a urine drug test is 1-5 days. However, hair drug testing is becoming more common due to the fact that the detection period can be up to 90 days. You must have at least an inch and a half of hair on your head or body hair may be used when conducting a hair drug test.

Facts About 10 Panel Drug Test

The most cost-effective option in the workplace
Most common and customizable screening method
Detects recent drug use

Remember that many opioid addictions lead to further drug use, including heroin, so you may find that a standard 5 and 10 panel is not fulfilling your needs. In this case, consider a 12-panel drug test, which tests for additional opiates and painkillers that would not show up on a test with fewer panels.

A urine test detects recent drug use and is currently the only testing method that is approved for federally-mandated drug testing. Urine testing is appropriate for all testing reasons, from pre-employment to random to post-accident - and can be performed for a wide range of illicit and prescription drugs.

What drugs are screened for in a 10 Panel Drug Test?

The drugs tested in a 10 panel urine drug test include:

Amphetamines
Barbiturates
Benzodiazepines
Cocaine
Marijuana
MDA
Methadone
Methaqualone
Opiates
PCP
Propoxyphene

The standard 10 panel drug test is typically collected at a collection site and analyzed at a SAMHSA Certified Laboratory. If you need a rapid results test, the 10 panel is available for a rapid result in most areas nationwide. Results for a rapid results test are typically available the same business day (for negative results) and if a non-negative result exist, we send the specimen to the lab to perform confirmation testing at no additional charge.

What drugs are screened for in a 10 panel hair drug test?

Amphetamines
- Methamphetamines
Barbiturates
Benzodiazepines
Cocaine
Marijuana
Methadone
Opiates
- Codeine
- Morphine
- Heroin
Phencyclidine (PCP)
Propoxyphene

What is a drug test?

A drug test is a technical analysis of a biological specimen such as urine, hair, blood, breath, finger nail and oral fluid/saliva. The common procedure for a drug test is to have a donor provide a specimen to a drug testing collection specialist, complete a chain of custody form and then the collector will send by carrier the specimen to a laboratory for analysis and a determination if the specimen is negative or positive. Although there many laboratories in the United States which provide drug testing analysis, it is recommended that only a laboratory that is SAMHSA Certified is to be used when determining a drug testing result.

Does passive smoke inhalation cause a false positive for marijuana?

"Passive" smoke inhalation from being in a room with people smoking marijuana is not considered valid, as the cut-off concentrations for lab analysis are set well above that which might occur for passive inhalation.

Other abnormalities in the urine screen may indicate that results may be a false negative or that there was deliberate adulteration of the sample. For example:

a low creatinine lab value can indicate that a urine sample was tampered with; either the subject diluted their urine by consuming excessive water just prior to testing, or water was added to the urine sample.
creatinine levels are often used in conjunction with specific gravity to determine if samples have been diluted. To help avoid this problem, the testing lab may color the water in their toilet blue to prevent the sample being diluted with water from the toilet.
subjects may also attempt to add certain enzymes to the urine sample to affect stability, but this often changes the pH, which is also tested.

How long do drugs stay in your system?

The window of detection or often times referred to as look back period of a drug test depend on several factors. Some of the factors impacting how long a drug will stay in your system are:

The amount of the drug taken
The frequency of the drug taken
The type of drug taken
An individual's body metabolic rate and general health
The amount of fluids consumed since ingesting the drug
The amount of exercise since ingesting the drug
Other genetic variations that would impact an individual's response to a specific drug

In the case of life-threatening symptoms, unconsciousness, or bizarre behavior in an emergency situation, screening for common drugs and toxins may help find the cause, called a toxicology test or tox screen to denote the broader area of possible substances beyond just self-administered drugs. These tests can also be done post-mortem during an autopsy in cases where a death was not expected. The test is usually done within 96 h (4 days) after the desire for the test is realized. Both a urine sample and a blood sample may be tested.

A blood sample is routinely used to detect ethanol/methanol and ASA/paracetamol intoxication. Various panels are used for screening urine samples for common substances, e.g. triage 8 that detects amphetamines, benzodiazepines, cocaine, methadone, opiates, cannabis, barbiturates and tricyclic antidepressants. Results are given in 10-15 min.

For information on drug testing in the private and public sector - CLICK HERE

For more information on drug and alcohol addiction - CLICK HERE

To schedule a 5, 10, 12, 14 or 17 panel urine or hair drug test at a testing center in Morrison IL, please call (800) 977-8664 or schedule online.

Introduction to Morrison

Morrison is a city in Whiteside County, Illinois, United States. The population was 4,188 at the 2010 census, down from 4,447 in 2000. It is the county seat of Whiteside County. It is located on the Historic Lincoln Highway, the nation’s first transcontinental highway and in Morrison was the site of two concrete "seedling miles", which served as prototypes of what an improved highway could do for the nation.

In 1854, Lyman Johnson and H. S. Vroom were already in what would become the City of Morrison as contractors and builders for the Air-line railroad, now the Union Pacific Railroad. Johnson and Vroom, along with several other entrepreneurs, acquired the land that would surround the rail station that was planned here. They managed the work of surveyor W.S. Wilkinson in the layout of the future town in 1855. Among these entrepreneurs were W.H. Van Epps. Lyman Johnson decided to call the town Morrison, in honor of Charles Morrison, a friend of Van Epps and a wealthy merchant from New York, who promised financial support in the way of loans for the town’s development. Shortly thereafter, Morrison suffered severe financial losses and he was unable to participate, yet his name remained.

Refrigerator manufacturer, Illinois Refrigerator Company, was organized in 1892 by Edward A. Smith, J.B. Market, George Brown, F.L. Sands, and F.R. Beals. Later it added school furniture to its line: Columbia School Equipment Company, which was a subsidiary of the Illinois Refrigerator Company. In 1914, Illinois Refrigerator Company acquired equipment to manufacture stoves, establishing the Summit Stove Company. Two additional school furniture companies formed the Illinois Seating Company and built a new factory in Morrison. The Morris and Rich Toy Factory of Sterling, IL moved to Morrison in 1928, locating in part of the Illinois Refrigerator Company building. In November 1929, a fire damaged two warehouses owned by Illinois Refrigerator Company, Rich Manufacturing Company, and Columbia School Equipment Company. The fire destroyed over 4,000 refrigerators and $35,000 worth of toys, including five or more carloads, which were on the nearby railroad tracks. The total loss was estimated at $500,000. By April 1932, the refrigerator company was bankrupt. Soon after, a new corporation was formed: Rich Illinois Manufacturing Company. The company made wood and metal refrigerators, electric refrigerators, toys, furniture, wood ware, and wood and metal fabricated buildings. In 1934, The City Ice and Fuel Company of Cleveland, OH, which operated under the name Ice Cooling Appliance Corporation (ICA), purchased the plant. The toy factory, Rich Illinois Manufacturing, moved to Clinton, Iowa. In 1954, ICA was sold to American Air Filter Company, Inc. at Louisville, Kentucky, which had consolidated with Herman Nelson Corporation of Moline, Illinois. In 1957, the Herman Nelson division established a factory in Morrison to manufacture air blowers, small portable heaters, and air conditioners, which eventually closed in 1966, moving to Brownsville, Tennessee.